MS pH 97- pH ORP Indicating Controller Transmitter Panel

FEATURE

• Advanced Embedded Microcontroller Based Design
• Can be connected to pH or ORP electrodes
• Multivariable Display for Process Value, Relay Status,Temperature & 4 to 20 mA output
• Easy Front Key Calibration
• Auto / Manual Temperature Compensation
• Set Point – 4 Nos
• 3.2-inch LCD display
• 4 to 20 mA DC Isolated Output for pH or ORP
• Password can be Set
• Weatherproof IP 66 Protection

• pH Range : 0 - 14 pH
• ORP Range : ± 2000 mV
• Temperature Range : -10 to 150°C
• pH Resolution : 0.01 pH
• ORP Resolution : 1 mV
• Temperature Resolution : 0.1°C
• pH Accuracy : 0.1% FS or ± 0.01pH
• ORP Accuracy : ± 2 mV
• Stability : 0.05% of measuring range every 24 hours without accumulation pH
• Repeatability : Better than 0.1% of measuring range
• Display : 128*64, 3.2-inch graphic dot matrix LCD
• Set Point : 4 Nos
• Calibration : pH - 3 Point, ORP - 2 Point
• Output : Two SPST relays, Max. load 3A/250VAC, set high/lowalarm, temp or clean control
• Retransmission Output : Isolated 4-20 mA DC for pH/ORP Max. load 1000Ω ( RS485 Optional)
• Temperature Compensation : Auto (PT-100), Manual (Adjustable 0 to 150°C)
• Power Supply : 100~240V 50/60Hz
• Enclosure MOC : ABS
• Protection : Weatherproof IP 66
• Work Temperature : 0～60℃, RH<95%, non-condensin
• Storage Temperature : -20～70℃, RH<55%, non-condensing
• Mounting : Panel Mounted
• Electrical Interface : Reserve three M12*1.5 gland
• Dimensions : 100 x 100 x120mm (Panel Cutout size 92X92mm)Weight : 0.45 kg
• Power Consumption : 3W